Concrete Labor Cost Guide

Estimate construction labour costs across 12 trades, 6 cities, and any project duration. Daily rates, project totals, contractor markup — all in one resource. For related background, see Project Planner.

Simple Labour Cost Guide

Select your city, trade, and duration to get an instant total labour cost estimate.

Full Project Labour Cost Guide

Add multiple trades and their durations to estimate total labour cost for an entire project or phase.

Current Pakistan Construction Labour Rates — 2026

Indicative daily wage rates across major cities. Select a city to see rates for that location.

Construction Trades in Pakistan — What Each Worker Does

Mason / Raj Mistri

Lays bricks, blocks, and stone. Builds load-bearing and partition walls. Also responsible for mortar mixing ratios on traditionally batched sites. The most common skilled trade on Pakistani residential construction sites. Typically paid 2–3× the helper rate.

Helper / Mazdoor

Carries materials, mixes mortar and concrete by hand, supports skilled trades, cleans formwork, and performs general site labour. The most numerous worker category on any construction site. Rate is the benchmark from which all other rates are calibrated.

Carpenter / Shuttering Mistri

Constructs and strips formwork (shuttering) for concrete columns, beams, and slabs. Also installs timber doors, window frames, and joinery. Shuttering carpenters are critical path — slab pours cannot proceed without their formwork. Typically paid similarly to masons.

Steel Fixer / Sariya Mistri

Cuts, bends, and ties reinforcing steel bars (rebar) to the shapes and spacings shown on structural drawings. Works closely with the site engineer on rebar placement, cover, and lap lengths. A critical quality-affecting trade — poor steel fixing directly causes structural deficiency.

Electrician / Wireman

Installs conduit, draws electrical cables, fits distribution boards, and connects outlets, switches, and fixtures. In Pakistan, most residential electrical work is done by wiremen paid a daily or lump-sum rate. Rates vary widely by certification level and work complexity.

Plumber / Naibband

Installs water supply pipes (GI, CPVC, or PPR), drainage lines (PVC), sanitary fittings, and overhead/underground water storage systems. In Pakistan, plumbers often also install gas piping — a task that strictly requires SNGPL-certified personnel for compliance with gas utility requirements.

Painter

Applies primer, paint, and finishing coats to internal and external surfaces. Rates vary by surface type (smooth plaster vs. rough textured), paint system (emulsion, oil-based, weather shield), and number of coats. Often hired on a per-unit area (per ft² or per m²) basis rather than daily rate.

Tile Layer / Tiler

Sets ceramic, porcelain, marble, or granite tiles on floors, walls, and bathroom surfaces. Includes cutting, grouting, and waterproofing works. Rate depends on tile size, pattern complexity, and surface (floor vs. wall). Commonly charged per ft² or per m² in Pakistan.

Plasterer / Plaster Mistri

Applies sand-cement plaster to masonry walls and ceilings in one or two coats. Critical for surface quality of final finishes. Plaster thickness, mix ratio (typically 1:4 or 1:6 cement:sand), and number of coats determine both quality and material consumption. Rate similar to or slightly below mason rate.

Excavation Worker / Khodai

Hand or mechanical excavation of trenches, foundation pits, and drainage channels. In Pakistan, most shallow excavation (up to 2 m) is still done by hand in urban sites due to space constraints. Rate is similar to helper but physically demanding — higher turnover. Mechanical excavation (JCB/excavator) estimated separately as plant hire.

Welder / Fabricator

Fabricates and installs structural steel elements, gates, grilles, windows, and steel doors. In Pakistan, skilled welders hold NAVTTC or international certification. Rates are higher than masons due to equipment operation (arc or MIG welding). Often hired on a lump-sum per-item basis for fabrication work.

Site Supervisor / Foreman

Oversees the daily work of multiple trade teams, reads drawings, interprets specifications, and reports progress to the project manager. In Pakistan, a good site supervisor (Mistri Ustad or Munshi) can make the difference between a well-run and a chaotic site. Paid significantly above trade rates.

Worked Examples — Pakistan Construction Labour Cost Estimates 2026

Slab Construction — Lahore, 1 Kanal House

Masons (Shuttering + Concrete) 4 workers

Duration 5 days

Daily rate (Lahore mason) PKR 2,200

Helpers 6 workers × 5 days

Helper rate PKR 1,100

Contractor markup (15%) Applied to total

PKR 91,080

Tiling — 2,500 ft² House Islamabad

Tile layers required 3 workers

Duration (floor + walls) 18 days

Islamabad tiler rate PKR 2,600

Helpers (grouting + cutting) 2 × 18 days @ PKR 1,300

Markup (20%) Applied to total

PKR 224,640

Foundation Steel Fixing — Karachi 5-Storey

Steel fixers 8 workers

Duration 12 days

Karachi steel fixer rate PKR 2,800

Helpers (bar carrying) 4 × 12 days @ PKR 1,400

3 overtime days (1.5×) 8 workers × 3 × 1.5

PKR 436,800

Monthly Site Labour — Peshawar Residential

Site supervisor 1 × 26 days @ PKR 3,200

Masons 5 × 26 days @ PKR 1,800

Helpers 8 × 26 days @ PKR 950

Plumber 1 × 26 days @ PKR 2,000

Contractor markup (15%) Applied to total

PKR 687,220

Factors That Affect Labour Rates in Pakistan Construction 2026

City & Location

Labour rates in Pakistan follow a clear geographic hierarchy in 2026:

  • Islamabad / Karachi — highest rates nationally
  • Lahore — typically 5–15% below Islamabad
  • Faisalabad / Multan — 10–20% below Lahore
  • Peshawar / KPK — variable; specialist rates competitive
  • Quetta / rural areas — 20–30% below major cities
  • Within-city variation: DHA/Bahria sites command a 10–20% premium over peri-urban sites due to distance and site-access restrictions

Season & Demand

Construction activity in Pakistan is strongly seasonal, which drives significant rate variation:

  • Peak season (Oct–March): cool, dry weather; maximum construction activity; rates 10–20% above average
  • Hot season (April–June): some slowdown in outdoor work; rates soften slightly
  • Monsoon (July–September): significant slowdown in major cities; rates may fall 10–15% as demand drops
  • Eid periods: expect acute labour shortage and rate spikes immediately before Eid ul-Fitr and Eid ul-Adha

Project Scale & Duration

Labour rates are negotiable and scale-dependent in Pakistan:

  • Long-term contracts (6+ months): 10–15% discount on daily rate in exchange for guaranteed work
  • Large projects (50+ workers): volume discount and better quality workers attracted by scale
  • Small or one-off work: typically pay premium rates — short duration workers want higher daily pay to compensate for uncertainty
  • Piece-rate vs daily rate: plastering, painting, and tiling are often done on a per-ft² piece-rate basis, which can be 20–40% more economical than daily rate for efficient workers

Skill Level & Certification

Within each trade, significant rate variation exists by skill and certification:

  • NAVTTC-certified tradespeople: 15–25% premium over uncertified equivalent
  • International experience (Gulf returnees): 20–40% premium for construction workers who have worked in UAE/Saudi Arabia and bring higher standards
  • Head mason / Ustad: 30–50% above standard mason rate — commands the team and negotiates on behalf of the group
  • Night shift work: 25–50% premium per Labour Laws (Pakistan Factories Act 1934 and provincial labour regulations)

Inflation & Economic Conditions

Pakistan has experienced significant labour rate inflation since 2022:

  • CPI-linked increases: labour rates across Pakistan have risen 35–60% from 2022 to 2026 in nominal rupee terms
  • Minimum wage: Government of Pakistan set PKR 37,000/month minimum wage for 2024–25 (approximately PKR 1,420/day for 26-day month). Our rates reflect market rates above this floor for skilled trades
  • Exchange rate effect: projects with international investors or contracts denominated in USD/AED tend to pay higher local wages
  • Provincial variation: Sindh’s minimum wage is set independently by the provincial government

Direct Hire vs Contractor

The hiring method significantly affects total labour cost:

  • Direct daily hire (Theka): lowest cost but requires direct management, record-keeping, and EOBI/social security registration obligations
  • Labour contractor (Thekadar): marks up 10–25% above direct rates but takes on management, recruitment, and legal obligations
  • Registered subcontractor: highest cost (15–30% markup) but provides accountability, insurance, and professional supervision
  • EOBI contribution: employers are legally required to contribute 5% of wages to EOBI (Employees Old-Age Benefits Institution) — often ignored in informal construction but required for compliance

Pakistan Construction Labour Rates Reference 2026 — All Cities

Indicative daily wage ranges for all major trades across Pakistan’s six largest cities. All figures in PKR per worker per day. Based on 2026 market surveys.

  • Trade: Mason / Raj Mistri; Skill Level: Skilled; Lahore: 2,000–2,400; Karachi: 2,200–2,800; Islamabad: 2,400–3,000; Faisalabad: 1,800–2,200; Peshawar: 1,700–2,100; Quetta: 1,600–2,000
  • Trade: Helper / Mazdoor; Skill Level: Unskilled; Lahore: 1,000–1,200; Karachi: 1,200–1,500; Islamabad: 1,200–1,500; Faisalabad: 900–1,100; Peshawar: 900–1,100; Quetta: 800–1,000
  • Trade: Carpenter / Shuttering Mistri; Skill Level: Skilled; Lahore: 2,200–2,600; Karachi: 2,400–2,900; Islamabad: 2,500–3,200; Faisalabad: 2,000–2,400; Peshawar: 1,900–2,300; Quetta: 1,700–2,100
  • Trade: Steel Fixer / Sariya Mistri; Skill Level: Skilled; Lahore: 2,200–2,700; Karachi: 2,500–3,200; Islamabad: 2,600–3,200; Faisalabad: 2,000–2,500; Peshawar: 1,900–2,400; Quetta: 1,800–2,200
  • Trade: Electrician / Wireman; Skill Level: Specialist; Lahore: 2,400–3,200; Karachi: 2,800–3,800; Islamabad: 3,000–4,000; Faisalabad: 2,200–2,900; Peshawar: 2,000–2,800; Quetta: 1,900–2,500
  • Trade: Plumber / Naibband; Skill Level: Specialist; Lahore: 2,200–3,000; Karachi: 2,600–3,500; Islamabad: 2,800–3,800; Faisalabad: 2,000–2,700; Peshawar: 1,900–2,600; Quetta: 1,800–2,400
  • Trade: Painter; Skill Level: Semi-Skilled; Lahore: 1,800–2,200; Karachi: 2,000–2,600; Islamabad: 2,200–2,800; Faisalabad: 1,600–2,000; Peshawar: 1,500–1,900; Quetta: 1,400–1,800
  • Trade: Tile Layer / Tiler; Skill Level: Semi-Skilled; Lahore: 2,200–2,800; Karachi: 2,400–3,000; Islamabad: 2,600–3,200; Faisalabad: 2,000–2,500; Peshawar: 1,900–2,400; Quetta: 1,700–2,200
  • Trade: Plasterer / Plaster Mistri; Skill Level: Semi-Skilled; Lahore: 1,900–2,400; Karachi: 2,200–2,800; Islamabad: 2,300–2,900; Faisalabad: 1,700–2,100; Peshawar: 1,600–2,000; Quetta: 1,500–1,900
  • Trade: Excavation Worker; Skill Level: Unskilled; Lahore: 1,100–1,400; Karachi: 1,300–1,600; Islamabad: 1,300–1,600; Faisalabad: 1,000–1,200; Peshawar: 950–1,150; Quetta: 900–1,100
  • Trade: Welder / Fabricator; Skill Level: Skilled; Lahore: 2,500–3,500; Karachi: 3,000–4,000; Islamabad: 3,200–4,500; Faisalabad: 2,300–3,000; Peshawar: 2,200–3,000; Quetta: 2,000–2,800
  • Trade: Site Supervisor / Foreman; Skill Level: Specialist; Lahore: 3,000–4,500; Karachi: 3,500–5,500; Islamabad: 4,000–6,000; Faisalabad: 2,800–4,000; Peshawar: 2,500–3,800; Quetta: 2,300–3,500

* All rates are indicative mid-point daily wages for 2026. Rates are exclusive of contractor markup, EOBI contributions, overtime, and resource/equipment allowances. Actual rates must be verified with local contractors and labour markets before use in formal project budgets.

Expert Tips for Managing Construction Labour Costs in Pakistan — 2026

Get Three Written Quotes Before Finalising

For any labour contract above PKR 200,000, get minimum three quotes from different contractors or labour gangs. Labour rates in Pakistan vary by 20–40% between suppliers for the same trade and quality level. Written quotes protect you from post-start rate disputes and give you a benchmark for negotiation.

Use Piece Rates for Measurable Tasks

For plastering, tiling, painting, and brickwork, consider piece rates (per ft² or per m²) rather than daily rates. Piece rates incentivise productivity — workers who finish faster earn more. Typical piece rates: plastering PKR 25–40/ft²; tiling PKR 30–55/ft²; painting PKR 12–22/ft² (Lahore 2026). Always include a quality standard clause in the piece-rate agreement.

Budget Separately for Helper Rates

Never forget helpers (mazdoors). Most skilled workers require 1–2 helpers each. A mason without a helper works at 50–60% efficiency. Your labour budget should include helper costs alongside skilled trade costs. The helper:skilled worker ratio is typically 1:1 for masonry, 1:1 for steel fixing, and 0.5:1 for plumbing and electrical.

Plan Around the Construction Season

Start labour-intensive work (brick walls, plaster, tiles) in October–February when weather is good and workers are plentiful. Avoid scheduling critical pours or large finishing packages in June–August (extreme heat + monsoon) or immediately before Eid periods when skilled labour is scarce and rates spike 15–30%.

Verify EOBI Registration for Formal Projects

Under Pakistan law, employers with 5+ workers must register with EOBI (Employees Old-Age Benefits Institution) and contribute 5% of wages. For formal projects (government contracts, bank-financed, DHA/Bahria approval required), EOBI compliance is audited. Build 5% EOBI contribution into your labour budget from day one — it is a legal obligation, not optional.

Keep Daily Attendance and Payment Records

Maintain a daily muster roll (attendance register) with each worker’s name, trade, daily rate, and signature or thumb impression against payment. This protects against double-counting, ghost workers, and disputes over wages paid. Under Pakistan labour law, wage records must be maintained for 3 years. A simple site diary with daily attendance suffices for small sites.

Frequently Asked Questions — Pakistan Construction Labour 2026

What is the current mason rate in Pakistan in 2026? +

What is the minimum wage for construction workers in Pakistan 2026? +

How much does it cost to plaster a 1 Kanal house in Lahore (labour only)? +

What is the difference between daily rate and piece rate — which is better? +

Do I need to pay overtime to construction workers in Pakistan? +

How do I estimate the total labour budget for a complete house in Pakistan? +

Labour Cost Guide 2026 — All rates are indicative market benchmarks for planning purposes only. Actual labour rates must be verified with local contractors before use in formal project budgets or contractual documents. concretesmath.com/ accepts no liability for rate discrepancies. |DisclaimerHow We Estimate

Scroll to Top